Sold out

1262 – Used Vacuubrand PC3001 VarioPro

1,900.00 ex.

This used Vacuubrand PC3001 VarioPro from 2015 was purchased from a biochemical/medical laboratory which had to close down. The vacuum pumping unit was in operation until closure of the laboratory. Thereafter, the pump was shipped to us, tested in our laboratory and found to be in good condition. The costprice of a new similar vacuumpump is about € 4850.

The offered used Vacuubrand PC3001 VarioPro is a very compact chemistry pumping unit and is an excellent solution when working with high boiling solvents. It has outstanding chemical resistance and superior vapor tolerance, high flow rate even at low vacuum and excellent ultimate vacuum even with gas ballast. This chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pumps motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance. The integrated vacuum controller enables fully automatic evaporation at a push of a button. Low space requirements, light weight and low operational noise contribute further to this unit’s flexibility and popularity for laboratory use. Typical applications are vacuum generation for rotary evaporators, vacuum concentrators and filtrations. With the continuously variable jog wheel, the pumping speed is manually adjustable to the process requirements. Furthermore, the inlet separator, made of glass with a protective coating, prevents droplets and particles from entering the pump.

Specifications:

  • CVC 3000 vacuum controller;
  • Inlet separator;
  • Vapor condenser at the outlet.

For more information, see Manual PC3001 Part 1, Manual PC3001 Part 2 or the description below.

Performance features:

  • Easily operated CVC 3000 vacuum controller with clear text menus and integrated venting valve
  • Automatic optimization of the vacuum level throughout the process for high process reproducibility and unattended operation, short process times due to zero-fluctuation (hysteresis-free) vacuum control – even for large amounts of vapor
  • Compact and powerful; excellent ultimate vacuum, even with continuous condensate purge
  • Whisper quiet and ultra-low vibration
  • Excellent environmental friendliness due to low power consumption and efficient solvent recovery

Technical data:

  • Number of heads / stages: 4 / 3
  • Max. pumping speed: 2.0 m3/h
  • Max. pumping speed: 1.2 cfm
  • Ultimate vacuum (abs.) mbar/torr: 2 / 1.5
  • Ultimate vacuum (abs.) with gas ballast mbar/torr: 4 / 3
  • Max. back pressure (abs.):  1.1 bar
  • Rated motor power: 0.16 kW
  • Max. operating current: 0.7 A
  • Motor speed range: 200 – 3000 min-1
  • Degree of protection: IP 20
  • Noise level at 50 Hz, typ. dBA: 42

Out of stock


Are you interested in this product or require more info ?

Just let us know and we’ll get in touch as soon as possible.

    Your name (required)

    Your Email (required)

    Subject

    Your message


    Description

    This used Vacuubrand PC3001 VarioPro from 2015 was purchased from a biochemical/medical laboratory which had to close down. The vacuum pumping unit was in operation until closure of the laboratory. Thereafter, the pump was shipped to us, tested in our laboratory and found to be in good condition. The costprice of a new similar vacuumpump is about € 4850.

    The offered used Vacuubrand PC3001 VarioPro is a very compact chemistry pumping unit and is an excellent solution when working with high boiling solvents. It has outstanding chemical resistance and superior vapor tolerance, high flow rate even at low vacuum and excellent ultimate vacuum even with gas ballast. This chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pumps motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance. The integrated vacuum controller enables fully automatic evaporation at a push of a button. Low space requirements, light weight and low operational noise contribute further to this unit’s flexibility and popularity for laboratory use. Typical applications are vacuum generation for rotary evaporators, vacuum concentrators and filtrations. With the continuously variable jog wheel, the pumping speed is manually adjustable to the process requirements. Furthermore, the inlet separator, made of glass with a protective coating, prevents droplets and particles from entering the pump.

    Specifications:

    • CVC 3000 vacuum controller;
    • Inlet separator;
    • Vapor condenser at the outlet.

    For more information, see Manual PC3001 Part 1, Manual PC3001 Part 2 or the description below.

    Performance features:

    • Easily operated CVC 3000 vacuum controller with clear text menus and integrated venting valve
    • Automatic optimization of the vacuum level throughout the process for high process reproducibility and unattended operation, short process times due to zero-fluctuation (hysteresis-free) vacuum control – even for large amounts of vapor
    • Compact and powerful; excellent ultimate vacuum, even with continuous condensate purge
    • Whisper quiet and ultra-low vibration
    • Excellent environmental friendliness due to low power consumption and efficient solvent recovery

    Technical data:

    • Number of heads / stages: 4 / 3
    • Max. pumping speed: 2.0 m3/h
    • Max. pumping speed: 1.2 cfm
    • Ultimate vacuum (abs.) mbar/torr: 2 / 1.5
    • Ultimate vacuum (abs.) with gas ballast mbar/torr: 4 / 3
    • Max. back pressure (abs.):  1.1 bar
    • Rated motor power: 0.16 kW
    • Max. operating current: 0.7 A
    • Motor speed range: 200 – 3000 min-1
    • Degree of protection: IP 20
    • Noise level at 50 Hz, typ. dBA: 42

    Do you have a question?

    Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    [your_form_shortcode_here]