Description
This used Millipore Milli-Q Integral 5 water purification system is a complete laboratory water purification installation for the production, storage and distribution of both Type 2 pure water and Type 1 ultrapure water directly from potable tap water.
The system is supplied in the complete configuration in which it was previously used, including the Milli-Q Integral 5 production unit, Q-POD ultrapure water dispenser, E-POD pure water dispenser, underbench polyethylene storage tank, automatic tank sanitization module and Millipore washer distribution pump. A selection of additional spare filters and cartridges is also included.
The Milli-Q Integral 5 produces Type 2 Elix water which is stored in the reservoir and can be dispensed through the E-POD or supplied under pressure to laboratory equipment. For demanding applications, the system further purifies the water to Type 1 ultrapure quality, available through the Q-POD dispenser.
The complete installation was operational when disconnected and was subsequently drained for removal and storage. It was sold because the laboratory was taken over and subsequently closed. The shown pictures were taken at the previous location, the reservoir was located underneath the laboratory table and the pods and MiliQ Integral on the sink. It is in a good operational condition. Approximate year of manufacture / installation: 2020.
Specifications:
- Manufacturer: Millipore / Merck
- Model: Milli-Q Integral 5
- Water purification system for Type 2 and Type 1 laboratory water
- Feed water: potable tap water
- Pure water production capacity: 5 L/h
- Type 1 water resistivity: up to 18.2 MΩ·cm at 25 °C
- Type 1 TOC: <5 ppb
- Type 2 Elix water resistivity: >5 MΩ·cm at 25 °C
- Q-POD ultrapure water dispenser included
- E-POD pure water dispenser included
- Q-POD / E-POD dispensing rate: up to approximately 2 L/min
- Underbench polyethylene storage tank included
- Tank capacity: approximately 100 L
- Automatic Sanitization Module included
- Tank vent filter included
- Millipore Washer Distribution Kit ZWDK5R100 included
- Distribution pump for supplying pure water to laboratory equipment
- Distribution capacity: approximately 16.5 L/min at 1 bar
- Distribution Kit power supply: 230 V, 50–60 Hz
- Progard pre-treatment cartridge system
- Quantum polishing cartridge system
- Additional spare filters and cartridges included
- Approximate year: 2020
- Complete system was operational when disconnected
- Drained for transport and storage
- Newprice approximately €26000
This particularly complete Milli-Q Integral 5 configuration provides an integrated solution for producing, storing and distributing both general laboratory pure water and high-quality ultrapure water. The included spare filters and cartridges provide additional value and facilitate future maintenance of the system.
