Description
This used Masterflex peristaltic pump system with controller and Easy-Load II Pump Head is a programmable laboratory peristaltic pump system designed for accurate fluid dispensing, pumping and dilution applications. The system is suitable for laboratories requiring repeatable liquid transfer, reagent dispensing, sample preparation, media addition, filling, dosing and general fluid-handling tasks.
The system consists of a Masterflex Digi-Staltic 77310-01 pump drive, a Masterflex Digi-Staltic 77310-02 pump system controller and a Masterflex Easy-Load II 77200-62 L/S pump head. The controller provides programmable operation for dispenser, pump and diluter functions, while the peristaltic pump head allows quick tubing changes and valve-free pumping. The Easy-Load II pump head is designed for L/S 15, L/S 24, L/S 35 and L/S 36 tubing. Masterflex peristaltic pumps are widely used because the fluid only contacts the tubing, making them suitable for many laboratory, pharmaceutical, chemical and bioprocess applications.
The unit is in a good operational state.
Specifications
- Manufacturer: Cole-Parmer / Masterflex
- System: Digi-Staltic peristaltic dispensing system
- Pump drive model: 77310-01
- Controller model: 77310-02
- Pump head model: Masterflex Easy-Load II 77200-62
- System type: programmable peristaltic pump / dispenser / diluter
- Pump drive speed range: 6–600 rpm, according to pump drive label
- Motor power: 0.1 HP, according to pump drive label
- Pump head tubing compatibility: Masterflex L/S 15, L/S 24, L/S 35 and L/S 36 tubing
- Pump head material: PPS housing with stainless steel rotor, according to Easy-Load II model 77200-62 specification
- Maximum flow rate with one 77200-62 pump head: up to approximately 2900 ml/min with L/S 36 tubing at 600 rpm
- Approximate flow rate with L/S 15 tubing: up to 1000 ml/min at 600 rpm
- Approximate flow rate with L/S 24 tubing: up to 1700 ml/min at 600 rpm
- Approximate flow rate with L/S 35 tubing: up to 2300 ml/min at 600 rpm
- Approximate flow rate with L/S 36 tubing: up to 2900 ml/min at 600 rpm
- Controller functions: dispenser, pump and diluter operation
- Controller connections visible: PC, balance and pump ports
- Pump ports visible on controller: Pump 1, Pump 2, Pump 3 and Pump 4
- Remote interface connector on pump drive
- Power supply: 115/230 VAC, 50/60 Hz, 1 phase
- Current rating: 1.7 A at 115 V / 0.8 A at 230 V, according to label
- Protection class: IP22, according to label
- Fuse: T2.5 A, 250 V, according to label
- Included: pump drive, controller, Easy-Load II pump head and connection cable as pictured
