Sold out

1042 -Used Mettler Halogen Moisture Analyser HR 83

1,490.00 ex.

This Mettler Halogen Moisture Analyser HR 83 was tested, maintained and were necessary critical parts were renewed in our own laboratory. It is in a good state and fully functional although the outside plastic cap shows some signs of wear (see photos).

In comparision to the conventional drying oven method the HR 83 needs a shorter time to reach its maximum power and allows the use of higher temperatures. It gives an uniform heating of the sample which ensures good repeatability. The system offers many other possibilities, we are gladly to supply more information.

At the start of the measurement, the moisture analyser determines the weight of the samples. The sample is then quickly heated by the integral halogen heating module and the moisture vaporizes. During the drying process the instrument continually measures the weight of the sample and displays
the reduction in moisture. Once drying has been completed, the moisture of solids content of your sample is displayed as the final result. The results can be automatically printed by the attached printer

A new system will cost approximately 6000 €.

For more info see the folder: mettler_moisture_analysers

Out of stock


Are you interested in this product or require more info ?

Just let us know and we’ll get in touch as soon as possible.

    Your name (required)

    Your Email (required)

    Subject

    Your message


    Description

    This Mettler Halogen Moisture Analyser HR 83 was tested, maintained and were necessary critical parts were renewed in our own laboratory. It is in a good state and fully functional although the outside plastic cap shows some signs of wear (see photos).

    In comparision to the conventional drying oven method the HR 83 needs a shorter time to reach its maximum power and allows the use of higher temperatures. It gives an uniform heating of the sample which ensures good repeatability. The system offers many other possibilities, we are gladly to supply more information.

    At the start of the measurement, the moisture analyser determines the weight of the samples. The sample is then quickly heated by the integral halogen heating module and the moisture vaporizes. During the drying process the instrument continually measures the weight of the sample and displays
    the reduction in moisture. Once drying has been completed, the moisture of solids content of your sample is displayed as the final result. The results can be automatically printed by the attached printer

    A new system including the printer will cost approximately 5000 €.
    Our system which is as new, is offered for 1400€.

    For more info see the folder: mettler_moisture_analysers

    Do you have a question?

    Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    [your_form_shortcode_here]